The place where supercross, freestyle & motocross collide
Checking over your bike can be time consuming, so to make the process quicker for the next time, after you’ve properly torqued a nut and/or bolt, mark the surface beside the bolt or over the nut and bolt with a permanent marker as reference point.
Put your new tire in the sun to warm it. A cold tire will be much stiffer than a warm one and warming it makes the entire process far easier. Place your wheel on the work stand or bucket and
I recently purchased a 28 Honda CRF45R and after four hours of riding, took it back to the dealer for its first service. The mechanic at the dealership changes the oil and filter, check the valve clearances and check the
You will need air filter cleaning solvent and a bucket to put it in, air filter oil, a plastic bag, contact cleaner, a socket wrench with an 8-12mm socket, fresh running water and a bucket of warm soapy water
Remove the chain by first removing the joining link and rolling it off the sprockets. Remove the split pin and rear axle nut. Tap the axle with a rubber mallet to start removing it and then pull it out from the opposite side. Lay the wheel down on a suitable surface.
If there are any notches in the brake pin you must replace it